Hurry and get yours while these amazing deals last! All Intense bikes and frames listed are top-quality, last or previous years' models without blems or imperfections unless otherwise listed. We're making room for the 2019 lineup. All Outlet complete bikes come with our new Intense-branded accessory box, which includes bike manual, warranty info, purchase receipt, and tool kit (torque wrench, shock pump and more) for easy set-up. New and Blemish bikes are offered with our standard warranty. Demo bikes are offered with a 1-year warranty.
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
M16C NM FRAME AND SHOCK
Regular price$2,499.00Sale price$1,849.00
Price Shown Includes Import Duties
Limited Availability, Order Yours Today!
The Expert Build M16 frame only.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
M16: FEATURES AND BENEFITS VIDEO
EXPERT BUILD SPECIFICATIONS
FRAME
M16 NM 275 Monocoque UD Carbon Front and Rear Triangle 275” DH Frameset, ISCG 05 Mount, w/ 157 x12 mm spacing, 215 - 240 mm travel
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
2016 M16 ALLOY PALMER FRAME & SHOCK
Regular price$3,399.00Sale price$1,999.00
Price Shown Includes Import Duties
Intense M16 Alloy Palmer Edition Downhill Bike. The 2016 M16 is the result of 3 years of development and represents precisely where Intense is at this moment as a company. The M16 is a world-class, downhill racing machine, at 9.5 inches of rear travel, with geometry developed in conjunction with Intense Factory Racing Team riders Bernat Guardia, Jack Moir, Luca Cometti and Ferran Jorba, as well as Intense test pilots Chris Kovarik, Shaun Palmer and Claire Buchar. Intense was the pioneer of downhill racing bikes – and the M16 is the new standard. Complete bike shown above. This product is offered as a Frame and Shock only option.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
M16: FEATURES AND BENEFITS VIDEO
FRAME AND SHOCK SPECIFICATIONS
FRAME
M16 275 Hydroformed Alloy Front and Rear Triangle 275” DH Frameset, ISCG 05 Mount, w/ 157 x12 mm spacing, 215-240 mm travel
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
SPIDER FOUNDATION BUILD
Regular price$2,999.00
Price Shown Includes Import Duties
WHAT IS AN INTENSE FOUNDATION BUILD?
We've carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
RECLUSE FOUNDATION BUILD 11SPD
Regular price$2,999.00
Price Shown Includes Import Duties
WHAT IS AN INTENSE FOUNDATION BUILD?
The Foundation Build Recluse is our entry level build with an NM frame. We've carefully selected and tested each component to provide an exception ride experience at our most competitive price point. The Foundation build comes with Intense branded alloy bars, stem and hubs.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
SPIDER EXPERT BUILD
Regular price$3,999.00Sale price$3,499.00
Price Shown Includes Import Duties
WHAT IS AN INTENSE EXPERT BUILD?
We've carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
2016 CARBINE PRO SIZE LARGE BLEM WILSON
Regular price$3,499.00
Price Shown Includes Import Duties
The Pro Build Carbine. We've carefully selected and tested each component to provide an exceptional ride experience at our most competitive price point. Blem bikes come with our standard 5-year warranty and are brand new with the exception of minor scratches, paint blems, decal blems, or minor wear from shipping.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
PRO BUILD SPECIFICATIONS
FRAME
Carbine full mountain carbon, 125-140mm travel, internal routing, ISCG 05 mount, 142 x 12mm thru-axle
FORK
RockShox Pike RCT3, 29” 15QR Thru Axle, 160 mm Travel
SHOCK
Rock Shox Monarch Plus HV MM , RC3 200 x 57 HV MM Custom Tune
WHEELSET
WHEELS
DT Swiss E1700
HUBS
28 Hole DT Swiss 340 ;15 mm Front Hub; 142 x 12 Rear Hub w/ XD Driver, Spline 29
RIMS
DT Swiss M 1700 Spline Two 29", Tubeless Ready
SPOKES
DT Competition
TIRES
Maxxis High Roller II, 29x2.3“, EXO TR
DRIVETRAIN
SHIFTERS
SRAM X1 11-speed
REAR DERAILLEUR
SRAM X01 11-speed
FRONT DERAILLEUR
N/A
CRANK
SRAM X1 1200 , 30T
CASSETTE
SRAM XG-1175 10-42, 11 speed
CHAIN
SRAM X1
CHAIN GUIDE
N/A
BOTTOM BRACKET
COMPONENTS
SADDLE
Fabric Scoop Radius Elite
SEATPOST
KS LEV Integra, 385mm, Zero Offset, 125mm of Travel
HANDLEBAR
Renthal Fatbar, 760mm
STEM
Thomson X4 Mountain
HEADSET
N/A
BRAKESET
SRAM Guide RS hydraulic disc, 180mm rotor front 160mm Rear
GRIPS
Intense Dual Lock-On
*Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 250lbs
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
FREQUENTLY ASKED QUESTIONS
How long is the warranty period for my Intense?
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
2016 TRACER PRO BUILD SIZE LARGE
Regular price$4,999.00Sale price$3,499.00
Price Shown Includes Import Duties
2016 INTENSE TRACER PRO BUILD
We've carefully selected and tested each component to provide the highest possible ride experience.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR):
160mm/160mm
WHEEL SIZE:
27.5" / 650b
BUILD WEIGHT (NO PEDALS)
NA
FRAME WEIGHT:
NA
HT ANGLE:
66.5 ̊
REACH:
445mm / 17.5" (Large)
PRO BUILD SPECIFICATIONS
FRAME
Tracer Full Mountain Carbon, 140-160mm travel, internal routing, ISCG 05 mount, 142 x 12mm thru-axle
FORK
RockShox Pike RCT3 3-Position Lever (Open, Pedal, Lock) | Low Speed Compression in Open Mode | External Rebound
SHOCK
RockShox Monarch Plus RC3 High Volume (Custom Tune)
WHEELSET
WHEELS
DT Swiss E 1700 Spline® Two Rims (Tubeless Ready)
HUBS
28 Hole DT Swiss 350
RIMS
DT Swiss E 1700 Spline® Two Rims (Tubeless Ready)
SPOKES
DT Competition
TIRES
Maxxis High Roller II EXO TR Tires
DRIVETRAIN
SHIFTERS
SRAM X1 11-Speed Shifter
REAR DERAILLEUR
SRAM X01, 11 speed
FRONT DERAILLEUR
N/A
CRANK
SRAM X1 1200, 32T
CASSETTE
SRAM XG-1175 10-42T
CHAIN
SRAM X1, 11 speed
CHAIN GUIDE
BOTTOM BRACKET
PF92
COMPONENTS
SADDLE
Fabric Scoop Radius Elite
SEATPOST
Kindshock LEV Integra (31.6 x 396 mm, zero offset, 125 mm travel)
HANDLEBAR
Renthal Fatbar (20 x 760 mm)
STEM
Thomson Elite X4 (50 mm)
HEADSET
Cane Creek 40, alloy cartridge, 25mm of spacers
BRAKESET
SRAM Guide RS Hydraulic Disc, 180mm front, 180 mm rear
GRIPS
Intense Dual Lock-On
*Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 250lbs
FIND YOUR SIZING
GEOMETRY (mm / inch)
FREQUENTLY ASKED QUESTIONS
How long is the warranty period for my Intense?
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
ACV PRO BUILD MEDIUM DEMO AM1
Regular price$4,699.00Sale price$3,679.00
Price Shown Includes Import Duties
The Pro Build ACV offers a competitive spec. We've carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
ACV 27+ Monocoque UD Carbon Front and Rear Triangle, alloy Top Link, Internal Derailleur Routing, Integrated protector, w/ 148 x12 mm spacing, 115 -130 mm travel
FORK
Rock Shox Pike RCT3 27.5+, Solo Air, 150mm, Boost 110x15mm
Tru Vativ Descendant Carbon Eagle Boost GXP 170mm, 32T
CASSETTE
Sram XG1275 X1 Eagle 12speed, 10-50T
CHAIN
Sram GX Eagle 12speed
CHAIN GUIDE
N/A
BOTTOM BRACKET
Sram Pressfit GXP BB92
COMPONENTS
SADDLE
Fabric Scoop Radius Elite w/ Cr-Mo Rails
SEATPOST
Fox Transfer 31.6mm, 150mm Dropper
HANDLEBAR
Intense Recon 780mm Carbon, 31.8 mm diameter
STEM
Intense Recon ELITE 50mm, 31.8 mm diameter
HEADSET
Cane Creek 40 Series, ZS44/EC49.40
BRAKESET
Sram Guide RS Hydraulic Disk 180mm Front & 160mm Rear
GRIPS
Intense Lock-On
*Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 250lbs
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
2018 CARBINE PRO BUILD SMALL DEMO CS5
Regular price$4,999.00Sale price$3,999.00
Price Shown Includes Import Duties
The Pro Build Carbine offers a competitive spec with our SL frame. We've carefully selected and tested each component to provide an exception ride experience at an aggressive price.
This model being offered is a used demo and is in excellent shape with normal signs of ride wear. Demo bikes are offered with a 1-year frame warranty.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Tru Vativ Descendant Carbon Eagle Boost GXP 175mm, 32T
CASSETTE
Sram XG1275 X1 Eagle 12speed, 10-50T
CHAIN
Sram GX Eagle 12speed
CHAIN GUIDE
BOTTOM BRACKET
Sram Pressfit GXP BB92
COMPONENTS
SADDLE
Fabric Scoop Radius Elite w/ Cr-Mo Rails
SEATPOST
Fox Transfer 31.6mm, 150mm Dropper
HANDLEBAR
Intense Recon 780mm Carbon
STEM
Intense Recon ELITE 40mm
HEADSET
Cane Creek 40 Series, ZS44/EC49.40
BRAKESET
Sram Guide RS Hydraulic Disk 180mm Front & 180mm Rear
GRIPS
Intense Dual Lock-On
*Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
2018 TRACER PRO XL DEMO TX1
Regular price$4,999.00Sale price$3,999.00
Price Shown Includes Import Duties
The Pro Build Tracer offers a competitive spec with our SL frame. We've carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
This model being offered is a used demo and is in excellent shape with normal signs of ride wear. Demo bikes are offered with a 1-year frame warranty.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
Tracer 275 SL Monocoque UD Carbon Front and Rear Triangle, Carbon Top Link, Internal Cable Routing, Integrated Protectors, w/ BOOST 148 x12 mm Spacing, 165 mm travel
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
CARBINE PRO BUILD MEDIUM DEMO B15
Regular price$4,999.00Sale price$3,999.00
Price Shown Includes Import Duties
The Pro Build Carbine offers a competitive spec with our SL frame. We've carefully selected and tested each component to provide an exception ride experience at an aggressive price.
This model being offered is a used demo and is in excellent shape with normal signs of ride wear. Demo bikes are offered with a 1-year frame warranty.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Tru Vativ Descendant Carbon Eagle Boost GXP 175mm, 32T
CASSETTE
Sram XG1275 X1 Eagle 12speed, 10-50T
CHAIN
Sram GX Eagle 12speed
CHAIN GUIDE
BOTTOM BRACKET
Sram Pressfit GXP BB92
COMPONENTS
SADDLE
Fabric Scoop Radius Elite w/ Cr-Mo Rails
SEATPOST
Fox Transfer 31.6mm, 150mm Dropper
HANDLEBAR
Intense Recon 780mm Carbon
STEM
Intense Recon ELITE 40mm
HEADSET
Cane Creek 40 Series, ZS44/EC49.40
BRAKESET
Sram Guide RS Hydraulic Disk 180mm Front & 180mm Rear
GRIPS
Intense Dual Lock-On
*Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
5-year limited warranty on carbon frames (except Downhill)
3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail (Primer, Spider and Recluse),
2.6 for enduro/downhill (Carbine, Tracer and M16), and 3.0 for plus tire (ACV) frame options.
Is my frame compatible with Eagle?
All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
Excluding our downhill bikes, all carbon frames Use a bb92 and has a 73mm BB shell width.
Excluding our downhill bikes, all alloy frames use a threaded bb and has a 73mm BB shell width.
All downhill bikes use a threaded bb and has a 83mm BB shell width.
Where is my serial number located?
The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace. For more bike
specific locations,
click here.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit
ROCK SHOX or
FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to 225mm on a small and 260mm on medium, large and XL frames.
How much sag should I run on my rear shock?
Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video (
Click Here).
How much does a particular frame, or built model weigh?
The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR
click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline here. Info for this is under the “Support” tab on the home page.
Is there touch up paint available for my bike?
No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JS-Tuned geometry, typically the bikes geometry are matched with our component spec to make that particular
bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or,
click here to see the tech video demonstration.
How can I register my bike?
Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this
register my bike link.
Can I purchase parts directly through you?
Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or
email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within
90 days on the Intense website
Register My Bike. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty,
the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
You should always do a post-ride and pre-ride bike check.
Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into
our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can
Click Here to see the tech video.
Is there an owner’s manual for my bike model?
The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the
bike manual page on our website.
Where can I demo an Intense bike at?
Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance,
reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the
tech video here.
What is recommended for seatpost and seat tube care?
Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.
SPIDER PRO BUILD
Regular price$4,999.00Sale price$4,499.00
Price Shown Includes Import Duties
WHAT IS AN INTENSE PRO BUILD?
The Pro Build Spider offers a competitive spec with our SL frame. We've carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.